Push Fit 1/2''X1/2" Reducing Union Pipe Fitting
Reducing Union Pipe Fitting Introduction
1. Color: Natural Brass Color,Slivery
2. Size: 1/2"
3. Standard: EN1254, ASSE1061
4. Certification:CUPC, NSF, AB1953, ACS, ECM, ISO9001:2008, CE
Reducing Union Pipe Fitting Characteristic:
1) Made in brass material or carbon steel with nickel plated, and
sealed with NBR
2) Easy to connect tube by one touch, and the is applicable for
Polyurethane tubing and Nylon tubing
Reducing Union Pipe Fitting Specification:
| Specification | Parameter |
| Name | Push Fit 1/2''X1/2" Reducing Union Pipe Fitting |
| Applicable medium | Compressed Air, Vacuum |
| Pressure range | 0~1.0 MPa |
| Proof pressure | 1.5 MPa |
| Negative range | -100kpa (10Torr) |
| Temperature range | 5°C~60°C |
| Applicable tube | PU hose, Nylon hose, PE hose |
Pictures
Installation
Select the correct size fitting and pipe for the job. Check that
fittings
and pipe are clean, in good condition and are free from damage and
foreign objects.Cut the pipe so that the ends are square.Ensure
that
there are no burrs or damage to the cut end.Once the pipe end is
cut
square and clean,use a permanent marker to mark the insert depth
on the outside of the pipe.This mark is used to ensure that the
joint
is assembled correctly.To assemble correctly,the pipe needs to be
pushed into the fitting untill it meets the tube stop.Follow these
three
steps to insert the pipe into the fitting.
1.lnsert the pipe through the release collar against the grab ring.
2.Push the pipe firmly with a slight twisting action until it
reaches
the tube stop.
3.To ensure that the pipe is correctly inserted, check that the
depth
mark is within 0.005 in (0.13 mm) of the end of the release collar.
Disconnection of the joint can only occur by using the PUSHLOCK
removal tool.By applying pressure to the release collar with the
re-
moval tool, the grab ring teeth are splayed.This action releases
the
pipe, allowing it to be removed from the fitting.
1.Place the PUSHLOCK removal tool around the pipe with the non-
branded face against the release collar.The end with the size dis-
played on the removal tool should be positioned around the pipe and
the other end around the neck of the fitting.
2.Push the removal tool against the release collar and pull the
pipe
with a twisting action to release the pipe.
3.Check the fitting and pipe end for damage.The fitting and pipe
should be free of damage, foreign objects and marks on the outside
diameter. If the pipe is damaged or marked, then cut and use a new
section of pipe.
about us
Originally founed in1983,TaiZhou JinQuan Copper Inc. is one of the
leading
manufacturer of lead free plumbing valves&fittings, mainly
serving plumbing
wholesalers,distributors and retailers.
We are currently supplying lead free PEX
fittings&Valves,push-fit fittings&Valves,
Various water supply stops and water connectors etc.All products
are made of
lead-free with DZR functional brass,and have been certified and
listed by IAPMO.
Our goal is to help our customers to increase their profitability
and gain more market
share by taking advantage of our extremely competitive price and
quality.
